Restoring All Settings To The Factory Default; Scan To A Memory Card Or Usb Flash Memory Drive; How To Set A New Default - Brother MFC-J4410DW Advanced User's Manual

Restoring all settings to the
factory default
You can restore the PhotoCapture settings
you have changed back to the factory default
for, Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Do one of the following:
Press View Photos and press

s or t on the Touchpanel to display
each photo. When the photo you
want to print is displayed, press OK.
 Press Print All.
d
Press Options.
e
Press s or t to display
Factory Reset.
f
Press Factory Reset.
g
The Touchscreen asks you to confirm to
change back to the factory default.
Press Yes to confirm.
h
Press .
Printing photos from a memory card or USB Flash memory drive
Scan to a memory card
or USB Flash memory
8
drive

How to set a new default

You can save the Scan to Media settings
(Scan Type, Resolution, File Type
and Remove Background) you use most
often by setting them as the default settings.
These settings will remain until you change
them again.
a
b
c
d
e
f
g
h
i
j
k
l
Open the media slot cover.
Put the memory card or USB Flash
memory drive in the correct slot.
Press .
Press (Scan).
Press s or t on the Touchpanel to
display Scan to Media.
Press Scan to Media.
Press Options.
Press Scan Type, Resolution,
File Type or Remove Background.
Then press the option you want to
change.
Repeat this step for each setting you
want to change.
After you have finished choosing you
preferred settings, press s or t to
display Set New Default.
Press Set New Default.
Press OK.
The Touchscreen asks you again to
confirm if you want to set the change as
the new default.
Press Yes.
Press .
8
8
8
55