Sending A Fax (Mfc Models Only); Additional Sending Options; Sending Faxes Using Multiple Settings; Stop Faxing - Brother MFC-J4410DW Advanced User's Manual

3

Sending a fax (MFC models only)

Additional sending
options
Sending faxes using multiple
settings
When you send a fax, you can choose a
combination of settings, such as
Fax Resolution, Contrast,
Glass Scan Size, and Real Time TX.
You can also choose: History,
Address Book, Broadcasting,
Colour Setting, Delayed Fax,
Batch TX, Polled TX, Polling RX,
Overseas Mode, Set New Default, and
Factory Reset.
Some settings are only available when
sending mono faxes.
a
Load your document.
b
Press (Fax).
The Touchscreen shows:
c
Press Options.
d
Press s or t on the Touchpanel to
display the setting you want to change.
Press the setting when it is displayed.
e
Press the option you want to set.
f
Go back to step d if you want to change
any more settings.
8
g
Press OK when you have finished
changing settings.
h
3
Enter the fax number.
i
Press Fax Start.
NOTE
3
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will
remain until you change them again. (See
Setting your changes as a new default
on page 10.)

Stop faxing

To stop faxing, press

Contrast

If your document is very light or very dark, you
may want to change the contrast. For most
documents, the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Load your document.
b
Press
c
Press Options.
d
Press s or t on the Touchpanel to
display Contrast.
e
Press Contrast.
.
(Fax).
3
3
3