Setting Your Changes As A New Default; Restoring All Settings To The Factory Default - Brother MFC-J4410DW Advanced User's Manual

Setting your changes as a
new default
You can save the settings for the copy
options you use most often by setting them as
default, such as Quality, Tray Select
Enlarge/Reduce, Density,
Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and 2-sided Copy.
These settings will remain until you change
them again.
1
MFC-J4610DW only.
a
Press (Copy).
b
Press Options.
c
Press s or t on the Touchpanel to
display the settings, and press on the
setting you want to change. Then press
the new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting, press
s or t to display Set New Default.
e
Press Set New Default.
f
Press OK.
The Touchscreen asks you again to
confirm if you want to set the changes as
the new default settings.
Press Yes.
g
Press .
Restoring all settings to the
factory default
7
You can restore the copy settings Quality,
Tray Select
1
,
Density, Page Layout, Ink Save Mode,
Thin Paper Copy, Remove Background
and 2-sided Copy that you have changed
to the factory default.
1
MFC-J4610DW only.
a
Press
b
Press Options.
c
Press s or t on the Touchpanel to
display Factory Reset.
d
Press Factory Reset.
e
Press Yes.
f
Press
Making copies
1
, Enlarge/Reduce,
(Copy).
.
7
7
45