Making N In 1 Copies Or A Poster - Brother MFC-J4410DW Advanced User's Manual

Chapter 7
Making N in 1 copies or a
poster (Page Layout)
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
NOTE
• Book Copy, Sort, Thin Paper Copy,
Ink Save Mode,
Remove Background and
Enlarge/Reduce are not available with
Page Layout.
• 2-sided Copy is not available with
Poster copy.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
Press s or t on the Touchpanel to
display Page Layout.
f
Press Page Layout.
g
Press s or t to display Off(1in1),
2in1(P), 2in1(L), 2in1(ID)
4in1(P), 4in1(L), Poster (2x1),
Poster (2x2) or Poster (3x3).
Press the option you want to set.
1
For information about 2 in 1 (ID), see 2 in 1 ID
Copy (Page Layout) on page 39.
h
Press s or t to review and confirm the
displayed list of settings for this copy. If
you do not want to change additional
settings, press OK.
38
i
Press Mono Start or Colour Start
to scan the page.
7
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
1
MFC-J4410DW and MFC-J4610DW only.
If you are using the scanner glass, go
to step j.
j
After the machine scans the page,
press Yes to scan the next page.
k
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps j and k for each page of
the layout.
l
After all the pages have been scanned,
press No to finish.
NOTE
• Make sure the paper size is set to A4, A3,
Letter or Ledger.
• You can only make one colour copy at a
time.
• You can only make one Poster copy at a
time.
• 2in1(ID), 4in1(P), 4in1(L),
Poster (2x1) and Poster (3x3) are
not available when using A3 or Ledger
size paper.
1
,
1