When The Receive File Indicator Is Lit - Lanier 3730 Operating Instructions Manual

When the Receive File Indicator is Lit

If the Receive File indicator is lit, a message has been received but could not be
printed for some reason. The message was stored in memory (Substitute Recep-
tion). When you solve the problem, the message will be automatically printed
out. The table below lists some problems that could have caused Substitute Re-
ception to take place and their solutions.
Why Substitute Reception
Occurred
Paper has run out
Toner is empty
Paper is jammed
Cover is open
Indication/Status
B is lit red.
D is lit red.
h is lit red.
h is lit red.
When the Receive File Indicator is Lit
Solution
Load paper.
See p.71 "Loading Paper in the Main
Paper Tray".
Replace the toner cassette.
See Cp.113 "Replacing the Toner
Cassette", Advanced Features.
Note
❒ Even if there is no toner left, you
can still send fax messages.
Remove the jammed paper.
p.75 "Clearing a Copy, Fax, or Print
Jam"
Close the cover.
4
79