Using Speed Dials - Lanier 3730 Operating Instructions Manual

Faxing
B
Set your original and select any
scan settings you require.
C
Press the Quick Dial key in which
2
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. If it is not, the fax number
is shown.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you wish to dial another des-
tination, press the {OK} key and
dial another fax number.
D
Press the {Start} key.
38

Using Speed Dials

You can specify destinations simply
by pressing the {Speed Dial} key and a
Speed Dial code (00 to 99).
You must store the destination's fax
number in a Speed Dial beforehand.
Additionally, you can store a name
for the destination in Speed Dials.
Note
❒ To register, edit, or delete Speed
Dial entries, see p.54 "Speed Dial"
❒ To check the contents of all Speed
Dials, print the Speed Dial list. See
p.54 "Printing Reports/Lists", Ad-
vanced Features.
❒ You can use codes 00-99 for Speed
Dials.
❒ If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
phone Directory function. See p.20
"Telephone Directory", Advanced
Features.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
A
Make sure that the machine is in
standby display.
B
Set your original and select any
scan settings you require.