Lanier 3730 Operating Instructions Manual page 51

L
Press the {OK} key.
The programmed Own Name is
displayed.
M
Press 0 or 1 to move the cursor,
and then enter your fax number
a f t e r t h e p r o g r a m m e d O w n
Name.
Note
❒ You need to add your fax num-
ber to the prorammed Own
Name in this step so that your
Fax Header contains both your
Own Name and your fax num-
ber.
N
Press the {OK} key.
Your Fax Header is programmed.
O
Press 0 or 1 until " 3. Own Fax
Number " is displayed.
P
Press the {OK} key.
Own Name/Fax Header/Own Fax Number
Q
Enter your Own Fax Number.
Note
❒ The format of the number is
normally as follows: Interna-
tional Dial Prefix, Your Country
Code, Your Area Code (do not
insert a pause after your Area
Code), followed by your tele-
phone number. Check the Inter-
national Dialing Prefix and the
Country Code with your local
telecommunications operator.
Characters you can enter include
numerals 0-9, plus symbols (+),
and spaces.
R
Press the {OK} key.
Your Own Fax Number is pro-
grammed.
S
Press the {User Tools} key to re-
turn to standby display.
3
45