Lanier 3730 Operating Instructions Manual page 55

F
Display the number of the Quick
Dial key you want to register.
Press a Quick Dial key, or search
using 0 or 1.
Note
❒ If a Quick Dial has already been
registered, the contents are dis-
played. Press 0 or 1 to select a
Quick Dial that is not pro-
grammed, and then press the
{OK} key.
G
Enter a fax number with the num-
ber keys.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you press the {Pause/Redial}
key, the last 10 fax numbers di-
aled are displayed. Press 0 or
1 to select the fax number you
want to specify, and then press
the {OK} key.
❒ Make sure a Dial Option is
stored in one of the User Func-
tion keys, and then enter the
other party's fax number, and
then press the User Function
key that contains the Dial Op-
tion. You can specify SUB or
SEP, SID and PWD. See p.23
"SEP Code", Advanced Features
or p.24 "SUB Code", Advanced
Features.
H
Press the {OK} key.
The fax number is programmed.
I
Enter the destination name.
Note
❒ Under rare circumstances, gar-
bled characters may appear
during name registration if you
use the {Pause/Redial} key to
display the fax number of par-
ties located in other countries. If
this happens, simply delete the
garbled characters using 0 or
1 and the {Clear/Stop} keys,
then go on to enter the name.
J
Press the {OK} key.
The name is programmed.
K
Press 0 or 1 to select "On" or
"Off".
Note
❒ Label insertion allows the re-
c e i v e r ' s n a m e t h a t i s p r o -
grammed in Quick Dial or
Speed Dial to be printed on the
fax when it is received at the
other end. See p.8 "Label Inser-
tion", Advanced Features.
Quick Dial
3
49