Lanier 3730 Operating Instructions Manual page 61

G
Display the number of the Speed
Dial you want to register (00 to
99).
Enter the Speed Dial number with
the number keys, or search using
0 or 1.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If a Speed Dial number has al-
ready been stored, the contents
are displayed. Press 0 or 1 to
select an unprogrammed num-
ber, then press the {OK} key.
H
Enter a fax number with the num-
ber keys.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ If you press the {Pause/Redial}
key, the last 10 fax numbers di-
aled are displayed. Press 0 or
1 to select the fax number you
want to specify, and then press
the {OK} key.
I
Press the {OK} key.
The fax number is programmed.
J
Enter the Destination name.
Note
❒ If a destination name is already
registered in the Speed Dial, the
name is shown on the display. If
you wish to change the destina-
tion name, press the {Clear/Stop}
key, and then enter another
name.
K
Press the {OK} key.
The search letter is registered.
L
Press 0 or 1 to select "On" or
"Off".
Note
❒ Label insertion allows the desti-
nation name that is programmed
in Quick Dial or Speed Dial to be
printed on the fax when it is re-
ceived at the other end. See p.8
"Label Insertion", Advanced Fea-
tures.
M
Press the {OK} key.
If you want to store another Speed
Dial number, go to step F.
N
Press the {User Tools} key to re-
turn to standby display.
Speed Dial
3
55