Picture Control - Audiovox HR7012 Owner's Manual

HR7012 ReaR Seat Video HeadReSt SyStem
SyStem SetuP Sub-menuS (continued)

PiCtuRe ContRol

(HR7012m)
(HR7012S)
PiCtuRe ContRol from the front Panel (m1 and m2) (figure 18):
1� P ress and hold the MENU/SELECT button on the front panel of the system (Figure 15) for
3 to 5 seconds to show the System Menu� (Figure 13)
2� U se the UP/DOWN direction buttons to select Picture Control and press the
Menu/Select button to enter the sub-menu�
3� U se the UP or DOWN direction buttons to select one of the four setting
in the Sub-Menu (Brightness, Contrast, Color,Tint and Reset)� Using the
LEFT/RIGHT direction buttons, adjust the level of the picture setting chosen�
NOTE: Levels are set from "0" to "16" for Brightness, Contrast and Color. The levels for Tint
is set from "-16" to "+16" . No Tint Control in PAL Mode.
4� A fter level setting(s) are made, the Picture Control sub-menu will automatically disappear
from main screen within 5 or 6 seconds, or press the Menu/Select button again to return
to the System Menu�
PiCtuRe ContRol from the Remote Control:
Select "M1" or "M2" and press the PIX button to select Picture Control.
1�
2� U se the UP/DOWN direction buttons to select one of the four setting
in the Sub-Menu (Brightness, Contrast, Color, Tint and Reset)� Using the
LEFT/RIGHT direction buttons, adjust the level of the picture setting chosen�
NOTE: Levels are set from "0" to "16" for Brightness, Contrast and Color. The levels for Tint
is set from "-16" to "+16". No Tint Control in PAL Mode.
3� A fter level setting(s) are made, the Picture Control sub-menu will automatically disappear
from main screen within 5 or 6 seconds, or press the PIX button again�
4� Select reset to return the picture setting control back to factory defaults�
Note: Picture control settings for DVD
mode are separate from the other A/V
sources� After adjusting the DVD picture
controls, the user can make separate
settings for the other A/V sources�
figure 18
owner's manual
19