Picture Control - Audiovox PAV2000DTV Owner's And Installation Manual

Picture Control

1. Press the SYSTEM MENU button on the remote control until the monitor displays
following picture and choose "PICTURE" on OSD.
2. Using the
3. Use the
adjustment (Ex. Contrast, Brightness, Tint). Press the ENTER key to make the desired
selection.
4. Press the
the figure below.
keys, place the cursor (Yellow Bar) on Picture and press the ENTER key.
keys and place the cursor (Yellow Bar) on the feature that needs
keys to adjust the level of the feature that needs adjustment as shown in
30