System Setup Menu; Using The System Menu - Audiovox HR7012 Owner's Manual

HR7012 ReaR Seat Video HeadReSt SyStem
SyStem menu
The System Menu allows the user to personalize the HR7012 settings� It is used in the initial setup
to adjust the picture quality and customize an adjustable functions� Once the initial settings
are customized, they will remain the same until modified or reset to the factory default settings�
NOTE: System Menu changes are best made without a DVD inserted into the unit.
This section describes how to adjust and set settings using the six setup screens (Figure 13):
1� VOLUME CONTROL
2� PICTURE CONTROL
3� FM MODULATOR (M1 Only)
HR7012m (m1)

Using the System menu

Navigating and selecting available settings in the System Menu is accomplished using the
Remote Control buttons (Figure 14), or the Front Panel buttons (Figure 15)�
Follow the steps outlined in this section to select and customize each of the six adjustable
functions (Sub-Menus) listed above, and refer to the sections that apply�
NOTE: Press and Hold the MENU/SELECT button for 5 seconds to access the System Menu.
16
figure 13
figure 14
HR7012m
figure 15
4� OSD LANGUAGE
5� IRT ON/OFF
6� DEFAULT D VD O N/OFF ( HR7012M)
DEFAULT AUTO ON/OFF (HR7012S)
HR7012S (m2)
HR7012S
owner's manual