System Menu - Audiovox HR7012 Owner's Manual

HR7012 ReaR Seat Video HeadReSt SyStem
Remote ContRol oPeRation (continued)
1. (m1) monitor Select
Press this button to select and control
HR7012M (M1) Monitor� (Figure 11)
2. PoWeR
Press this button to turn the system ON�
Press the button again to turn the system
OFF� (Figure 11)
3. tV (not applicable)
Note: If this button is pressed the remote
control will not control DVD functions
until the DVD button is pressed again�
(Figure 11)
4. SouRCe
Press this button to change the AV source
between DVD/USB and a connected AUX
source� (Figure 11)
5. PiX
This button is used to make picture
adjustments� Each time the button
is pressed, the adjustment OSD
cycles through bars for BRIGHTNESS,
CONTRAST, COLOR, TINT, and RESET�
Once the desired adjustment bar is
displayed, use the UP/DOWN button
to adjust the setting� The bar display
will automatically disappear if no
adjustments are made within 6 seconds
or if any button is pressed� (Figure 11)
6. dVd Source
T his button is used to switch connected
sources (DVD and USB)� This button
is only active when remote control is
in the DVD mode and a USB device is
connected� (Figure 11)

7. SyStem menu

This button is used to make system setup
adjustments� Each time the button is
pressed, the adjustment OSD cycles
through bars for VOLUME CONTROL,
PICTURE CONTROL, FM MODULATOR,
OSD LANGUAGE, IRT ON/OFF, and
DEFAULT DVD ON/OFF (MI) or DEFAULT
AV AUTO ON/OFF (M2)� (Figure 11)
8. enteR
Press this button to make an OSD
selection
of the DVD/USB� (Figure 11)
or begins playback
9. uP/doWn/left/RigHt arrows
P ress these buttons to navigate the
menu selection on the screen� (Figure 11)
10. diSPlay
P ress this button to display current disc
information while the disc is playing�
Press UP/DOWN arrow buttons to select
the Title or Chapter� For Title/Chapter
selection, use the numeric buttons to
enter the desired Title/Chapter selection�
(Figure 11)
11. Play button
P ress this button to initiate play mode
when a disc is loaded in the disc
compartment� (Figure 11)
12. SCan baCkWaRd button
P ress this button to search in the
backward direction� Press repeatedly to
change the search speed from 2, 4, 8, and
16 times the normal speed� (Figure 11)
13. PauSe button
P ress this button to pause the playback of
a disc� Pressing pause again or pressing
the Play button will resume normal
playback� (Figure 11)
14. PReV button
W hen a disc has more than one Chapter,
Track, or File, you can move to another
Chapter/Track/File� Press this button
briefly during play to step back to the
previous Chapter for DVD-video or
Track/File for VCD, SVCD, MP3, CD, etc�
(Figure 11)
15. fmm on/off
T his button is used to turn the wireless
FM Modulator ON and OFF� (Figure 11)
16. iRt on/off
T his button is used to turn the Infrared
Transmitter ON and OFF for Wireless
IR Headphones� Pressing M1 then the
IRT ON/OFF button will control the IR
Transmitter for M1� Pressing M2 then
the IRT ON/OFF button will control the IR
Transmitter for M2� (Figure 11)
17. numbers
Decimal number: 0 to 9; and +100: Add
100� Used for selecting tracks on a disc�
(Figure 11)
owner's manual
13