REMOTE CONTROL OPERATION
Battery Installation
Before attempting to operate the remote control, remove the protective pull tab at the bottom of the remote�
Battery Replacement
1� Depress the tab (1) and slide the battery holder (2) out in the direction of the arrow�
2� Install one CR2025 battery� Make sure that the proper polarity (+ or -) is observed�
3� Slide the battery holder into the remote control until it locks�
128-9213 AVXMTG13UA Owner's Manual 05 22 13.indd 9
Tab (1)
(1)
Protective Pull Tab
Clear Plastic
Battery
Holder (2)
(2)
Back View
7
7/19/2013 4:21:41 PM