Quick Start Guide - Audiovox HR7012 Owner's Manual

HR7012 ReaR Seat Video HeadReSt SyStem

QuiCk StaRt guide

Turn ON the Monitors (M1 and M2)�
1� Press the Power ON/OFF button� The
power indicator will light up red�
2� Insert a DVD, CD, MP3 disc into the disc
slot located on top of the M1 monitor
(disc label toward user)� Push down
gently on the disc until the player pulls
the disc in (Do Not force disc) or connect
a video source through the jacks on the
front panel�
3� Tilt the monitor to a comfortable
viewing position�
4� The supplied wireless IR headphones
have an "A-B" switch used to select
the audio from either the "M1" or
"M2" monitor� When sitting in front
of the M1 screen, use the CH. A setting�
When sitting in front of the M2 screen,
use the CH. B setting� Set the headset
to the proper channel and press the
Power On/Off switch� The power
indicator will light up red� Turn the
volume down to its lowest setting
before putting the headphones on�
5� When the DVD menu appears, select
the menu item using the UP/DOWN
buttons and press Enter or Play button�
6� If audio playback through the
vehicle radio is preferred, use the FM
transmitter ON/OFF button on the
remote control� Set the vehicle radio to
the channel selected on the M1 monitor�
If interference with a local radio station
occurs, set the FM modulator to one
of the other 100 radio frequencies
using the Channel Select buttons on
the remote control or front panel�
Note: To operate the M1 screen, press
M1 on the remote control. To operate
the M2 screen, press M2.
7� To turn OFF either M1 or M2, press and
hold the Power ON/OFF button for 5
seconds or turn the vehicle OFF�
owner's manual
5