19 (Vista) The IPsec Settings screen appears. Select the Use preshared key for authentication
radio button. Enter the pre-shared key used in the IPSec configuration that the Device is using for
the Default_L2TPVPN IPSec VPN rule, in this example, enter 1234567890. Click OK.
20 Enter the username and password of your user account configured on the Device. Click Connect.
Note: The user account must have been configured in the Maintenance > User
Account screen. Refer to
21 A window appears while the username and password are verified. The connection is then
established.
SBG3300-N Series User's Guide
Chapter 29 on page
325.
Chapter 4 Tutorials
99