ZyXEL Communications SBG3300-N000 User Manual page 379

Select Ethernet built-in from the Connect via list.
2
Figure 185 Macintosh OS 8/9: TCP/IP
For dynamically assigned settings, select Using DHCP Server from the Configure: list.
3
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Device in the Router address box.
Close the TCP/IP Control Panel.
5
Click Save if prompted, to save changes to your configuration.
6
Turn on your Device and restart your computer (if prompted).
7
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
Macintosh OS X
Click the Apple menu, and click System Preferences to open the System Preferences window.
1
Figure 186 Macintosh OS X: Apple Menu
Click Network in the icon bar.
2
• Select Automatic from the Location list.
SBG3300-N Series User's Guide
Appendix A Setting up Your Computer's IP Address
379