ZyXEL Communications SBG3300-N000 User Manual page 59

The contents of the certificate display in the View Certificate screen. Copy the Signing Request
5
section and paste it to a file (for example, sbg.req) in Fedora, or another system, which contains
your original CA certificate.
In Fedora, issue the following openssl command to generate the host certificate for the Device:
6
Click the Load_Signed button in the View Certificate screen.
7
Cut the contents of sbg.pem (only the binary portion between BEGIN CERTIFICATE and END
8
CERTIFICATE). You can use "vi" or your favorite text editor to cut the portion, but do not use the
"cat" command.
Paste it to the indicated part of the Certificate section in the View Certificate screen. Click
9
Apply.
SBG3300-N Series User's Guide
openssl ca -config ./openssl.conf -policy policy_anything -out sbg.pem
-infiles sbg.req
Chapter 4 Tutorials
59