Table of Contents
Advertisement
Operation
Master/Slave Mode
Standalone Flash
Master/Slave Mode
Sound-Active Flash
Master/Slave Mode
DMX Control
Master/Slave Mode
Menu Map
Main Level
A.
d.
FL.
Aud.
12
This mode allows you to set the MASTER product to control other products daisy
chained together. There are 3 ways to configure Master/Slave mode.
1. Go to FL. (00~99) in the main level on the first MASTER product.
2. Select the desired Flash Speed (00~99).
3. Go to A.(001~512) in the main level and set the DMX address to A.001.
4. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
5. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
6. Go to A.(001~512) in the main level of each of the SLAVE products and set the DMX
address to A.002, A.003, A.004 ... as it pertains to each product in the chain.
1. Go to Aud.(0~9) in the main level on the first MASTER product.
2. Select the desired sound-active mode (0~9).
3. Go to A.(001~512) in the main level and set the DMX address to A.001.
4. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
5. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
6. Go to A.(001~512) in the main level of each of the SLAVE products and set the DMX
address to A.002, A.003, A.004...as it pertains to each product in the chain.
1. Go to A.(001~512) in the main level of the first MASTER product and set the desired
DMX starting address.
2. Connect the SLAVE products using the SLAVE OUT connection on the back of the
MASTER product.
3. Connect the rest of the SLAVE products using the DMX IN/OUT connections.
4. Go to A.(001~512) in the main level of each of the SLAVE products and set the DMX
address to A.002, A.003, A.004...as it pertains to each product in the chain.
If more than 4 products are daisy chained together, the first product is the Master,
and the Slave products are set in order as 2, 3, 4, 1, 2, 3, 4 ... The last 4 products
run the same patterns of the first 4 products, and so on.
Programming Levels
001~512
3CH
4CH
00~99
0~9
Description
Selects a starting DMX address
Selects DMX channel mode
Selects Standalone mode and the strobe speed
Selects Sound-Active mode
Xeno™ 2500 User Manual Rev. 1
Advertisement
Table of Contents
