Scroller Mounting
Bracket
Procedure
Scroller Attachment
Xeno™ 2500 User Manual Rev. 1
The Xeno™ 2500 is includes an adaptor bracket to mount a scroller. Follow the
procedure below to mount the scroller brackets.
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the
lamp to cool down.
Bracket
Bracket
Attachment
Screws
Left Side View
2. Using the diagrams above, place each bracket on the product using the alignment
nipple and the bracket screws. Insure that each bracket is installed on the proper
side.
3. Tighten each of the 4 Phillips-head bracket attachment screws.
Slide the top
of the
scroller over
brass fitting
using the
hook points
on scroller
Secure the
scroller
using the
Phillips-head
screws on
the bracket.
Alignment
Nipple
Right Side View
Setup
Bracket
Bracket
Attachment
Screws
9