1. B EFORE EGIN What is included 1 x O-Beast™ 1 x Power Cord 1 x Warranty Card 1 x User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have arrived in good condition.
Do not daisy chain power to more than 25 units @ 120V. There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs. In the unlikely event that your unit may require service, please contact CHAUVET at 954-929-1115. 2. I NTRODUCTION...
DMX Channel Summary HANNEL UNCTION Function Strobe Color macro speed Rotation speed Product Overview Safety eyebolt Hanging Bracket bracket adjustment knob Power in Microphone Fuse holder sensitivity Microphone DMX in Power out DMX out DIP switches O-Beast™ User Manual 6/2/2009 2:39 PM...
To link two or more fixtures together you must use DMX compliant data cables. You can purchase CHAUVET certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable, please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
If you use a controller with a 5-pin DMX output connector, you will need to use a 5- pin to 3-pin adapter. You may use the CHAUVET Model number DMX5M, or DMX5F. The chart below details the proper cable conversion:...
Always use safety cables. Never mount the fixture in places where it may be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Hanging Clamp The clamp is sold separately O-Beast™ User Manual 6/2/2009 2:39 PM...
Please see the DIP switches settings for Stand-Alone Mode above to set the fixture to the Master setting of your choice. Turn the DIP switches to the Slave position on the Slave fixture, and they will react the same as the Master. Mode DIP switches Slave 1-10 = Off O-Beast™ User Manual 6/2/2009 2:39 PM...
Remote does not work Make sure connector is firmly attached to device If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location on the next page. O-Beast™ User Manual 6/2/2009 2:39 PM...
1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). See page 6 for details on this type of cable. CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’) O-Beast™...
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET and request an RMA #, prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.