Mounting; Orientation; Rigging - Chauvet Xeno 2500 User Manual

Setup

Mounting

Orientation

Rigging

Product Mounting Diagram
10
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this
product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the
product's weight. Refer to the
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable.
The Xeno™ 2500 comes with an already installed mounting bracket to which you will be
able to attach clamps for hanging. You must supply your own clamps and insure they are
capable of supporting the weight of this product. In addition, you will have to use a safety
cable to link the product to the structure.
Safety Notes
Technical Specifications
Overhead Mounting
in this manual.
chart for the weight-bearing
Xeno™ 2500 User Manual Rev. 1