Table of Contents
Advertisement
Auto Programs
Edit Custom
Programs
Master/Slave
Mode
Color Settings
COLORado™ 1-Quad IP User Manual Rev. 5
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01–10) or custom program (PR. 01–10).
a. If AT. 01–10 is selected; choose the speed (000–255).
You cannot edit any of the auto programs (AUTO 01–10). However, you can edit the
custom programs (PR.01–10). See
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired auto program (PR. 01–10).
3. Select the desired scene (SC. 01–30).
4. Select the desired color or effect (RED, GREN, BLUE, WHIT, STRB, TIME, or FADE).
5. Select the color or effect value (000–255 for colors and timers, or 00–20 for strobe).
6. Repeat for the other colors or effects.
7. Return to the scene (SC. 01–30) level.
8. Repeat the settings of colors and effects for the other scenes.
The Master/Slave mode allows a group of COLORado™ 1-Quad IPs (the slaves) to
simultaneously duplicate the output of another COLORado™ 1-Quad IP (the master)
without a DMX controller.
1. Set each of the slaves:
a. Go to RUN.
b. Select SLAVE.
2. Set the master product:
a. Set the running mode to DMX as explained in
b. Select an auto or custom program as explained in Auto Programs above, or a
static mix of colors.
·
The master is the one that runs a program whether in Auto, Custom or Static Color
mode.
·
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
·
The master should be the first product in the daisy chain.
The COLOR setting determines how the COLORado™ 1-Quad IP generates the white
color based on various RGB settings.
1. Go to the SET main level.
2. Select COLO.
3. Select OFF, RGBW, or UC.
OFF:
When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBW:
When all the RGB faders are set to 255, the resulting output is defined by
the configured white color (see
UC:
When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
Edit Custom Programs
below for details.
DMX
Calibrating the White
Operation
Control.
Color).
-11-
Advertisement
Table of Contents
