Adjusting The Sound; Using The Sound Menu; Using The Sound Field Control; Boosting The Bass Level - Pioneer S-GX3V Operating Instructions Manual

Adjusting the sound

Chapter 9
Adjusting the sound

Using the Sound menu

There are several optional sound settings you
can make from the sound menu.
1 Press SOUND MODE ( SHIFT + SFC) .
2 Use to choose the setting you want
to adjust.
The current setting is shown for each option (in
the order shown in step 3) as you cycle through
the display.
• If selecting an SFC memory (SFC MEM)
press ENTER to continue to the next step.
3 Use to adjust (or select) the setting.
Make adjustments to the following settings:
Setting What it does
Bass
Adjusts the amount of bass.
Treble Adjusts the amount of treble.
Stereo
Makes the stereo spread
Wide
appear wider than it really is
SFC
Stores your current bass,
Mem-
treble and stereo-wide
ory
settings as a preset.
4 Repeat steps 2 and 3 for other settings.
• Skip this step if selecting an SFC memory.
5 When you're done, press ENTER to
confirm and leave the Sound menu.

Using the Sound Field Control

Depending on the source you're listening to,
you may want to use the Sound Field Control to
match the source you're listening to.
• Press SFC repeatedly to select a mode.
The options are as follows:
• ACTION – Good for sound effects.
• DOME – Gives a 'live' feel to the sound.
• DRAMA – Good for enhancing dialogue.
• KARAOKE – Reduces the level of vocal
tracks on pre-recorded music.
• USER 1 / 2 – See Using the Sound menu
above.
• SFC OFF – (SFC indicator disappears)
Option(s)
–4 to +4

Boosting the bass level

–4 to +4
If you want to bring up the low end for certain
OFF
kinds of music or sound sources, you can use
the bass boost to do so.
ON
USER 1
• Press P.BASS to switch the bass boost
on (P.BASS 1) or off (P.BASS 0).
USER 2

Muting the sound

• Press MUTE to switch off the volume.
To switch the sound back on, adjust the
volume or press MUTE again.
09
27
En