Table of Contents
Advertisement
English
Area of use
The handset is intended for indoor and outdoor use. It is shock resistant and is protected
against water and dust (IP53), but it must not be immersed in fluid, treated violently or
carelessly.
The base unit and extra charger (+1 only) are intended for indoor use only.
If the handset is damp it should be wiped dry before it is charged!
If the batteries need to be changed, ensure the battery door is properly closed with screws
tightened to ensure water and dust resistance.
Battery
Because batteries only have a certain lifespan it is quite normal that call time and standby time
will decrease somewhat compared to the specifications when the telephone is used regularly.
Fully-charged batteries (10 hours charging) will last for approx. 120 hours standby time or
approx. 10 hours call time. These operation times apply at normal room temperature.
Full battery capacity will not be reached until the batteries have been charged 4-5 times.
The base unit has an automatic charging mechanism that prevents the batteries from being
overcharged or damaged due to prolonged charging.
The display is unlit during charging, to check battery level press ☼ or lift the handset.
Please note!
The base unit should not be located close to other electrical equipment, in direct sunlight or near any other strong
heat source! This is to minimize the risk of interference.
It is normal for the device to become warm during charging and is not dangerous.
Use only DORO original batteries. The guarantee does not cover any damage caused by incorrect batteries.
Coverage
The telephone's coverage will vary normally between 40 and 300 metres, depending on
whether the radio waves carrying the conversation are blocked by obstacles in their path.
Coverage can be improved by turning ones' head so that the handset is aligned with the base unit.
Sound quality declines as the limit is reached until the call is finally interrupted.
Making a call
1. Enter the required number.
2. Press
, and the number will be dialled. Press
to terminate the call.
O
L
Receiving a call
1. Wait for the handset to ring.
2. Answer the call by pressing
. Terminate the call with
.
O
L
Please note!
You can press Menu during a call to access certain functions. See Operator Services for more information.
When the battery is low or when there is too great a distance to the base unit the telephone will be unable to
connect to a line.
Advertisement
Table of Contents
