System Settings - Doro 760x Manual

System settings

System PIN is 0000 on delivery.
1. Press Menu. Scroll to Setting. Press OK.
2. Scroll to Base Set. Press OK.
3. Scroll to desired function e.g. Access Code. Press OK.
4. Scroll to required setting. Press OK.
Ring Priority
Care dial
Call barring
Net. Provider
Dial Set
Deregister
Base PIN
Default Set
Dial settings
These settings are usually not changed. System PIN is 0000 on delivery.
1. Press Menu. Scroll to Setting. Press OK.
2. Scroll to Base Set. Press OK.
3. Scroll to Dial Set. Press OK.
4. Scroll to desired function e.g. Access Code. Press OK.
5. Scroll to required setting. Press OK.
Access Code
Recall Time
Emergency No
Dialling Mode
English
You can decide whether all handsets should ring at once when there
is an incoming call, or if one handset should start ringing before the
others. You can set the number of ring signals for this function as well.
The CARE memory is used to store e.g. a security number. The call
will be connected via the speaker function by pressing the line key for
about a second.
Different types of outgoing calls are blocked, see separate description.
Settings to use different service providers, see separate description.
Settings for advanced installations, see separate description.
To deregister a handset from a base unit.
You can change the pin code (0000 on delivery).
Reset base unit.
Enter the digit that obtains an external line and the telephone will
insert a pause automatically when a number starts with that digit.
Only for adaptation to international company switchboards.
The UK setting is 98 ms. (600 ms in New Zealand).
Emergency numbers are excluded from call blocking functions.
The dial mode setting for UK must be Tone (Europe only).