INSTRUMENT AND CONTROL FUNCTIONS
TIP
●
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the
radiator.
●
If the engine overheats, see page
6-32 for further instructions.
3
Speedometer unit
TOTAL
TRIP
1
2
3
1. "TRIP" button/"RESET" button
2. Multi-function display
3. Speedometer
4. Red zone
The speedometer unit is equipped
with the following:
●
a speedometer (which shows the
riding speed)
NOTICE
Do not operate the scooter in the
speedometer red zone. Red zone:
120 km/h (75 mph) and above
●
an odometer (which shows the
total distance traveled)
3-3
●
EAUS1362
a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
Pushing the "TRIP" button switches
the display between the odometer
mode "ODO" and the tripmeter mode
"TRIP". To reset the tripmeter, enter
the "TRIP" mode, and then hold down
the "TRIP" button for at least one
second. The tripmeter can be used
together with the fuel gauge to esti-
4
mate the distance that can be trave-
led with a full tank of fuel. This infor-
mation will enable you to plan future
fuel stops.
Setting the odometer/tripmeter
reading mode
The odometer and tripmeter can be
set to count in either kilometers or
miles according to the following pro-
cedure.
ECAS0010
1. Turn the key to "
sing the reset button.
2. Release the reset button when
the display comes on.
3. The current mode appears in the
display: "CONT" (continental) for
the kilometer mode and "EnGL"
(English) for the mile mode.
" while pres-