Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha MAJESTY YP125E Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light
cover by removing the screw.
1. Screw
2. License plate light cover
3. License plate light bulb socket
2. Remove the socket (together
with the bulb) by pulling it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUM1461
1
3
1. Bulb
2
1
3. Remove the burnt out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light
cover by installing the screw.
Replacing an auxiliary light
bulb
This model is equipped with two auxi-
liary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove panel A. (See page 6-7).
2. Remove the auxiliary light socket
1. Auxiliary light bulb socket
3. Remove the burnt out bulb by
6-30
(together with the bulb) by pulling
it out.
1
pulling it out.
EAU42651
6