Initialization Window - Cisco 6000 series Configuration Manual

Initialization Window

Table 6-1
Table 6-1
Option
Administrator Accounts Area
Protocol
User Name
Password
Confirm password
Access Protocols Area
Enable HTTP
HTTP Port
Enable HTTPS
HTTPS Port
Enable Secure Shell
(SSH)
Secure Shell (SSH) Port Enter the SSH port that is used to access the IP camera. Valid port numbers
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
6-2
describes the options in the Initialization window.
Initialization Window Options
Description
Display only. Indicates the protocol that the corresponding administrator can
use to access the IP camera: HTTP/HTTPS or SSH.
Display only. Indicates the default user name for the corresponding
administrator: admin or root
Enter a password for the corresponding administrator. The password is case
sensitive and must contain from 8 to 32 characters, which can be letters,
numbers, and special characters, but no spaces. Special characters are: ! $ (
) - . @ ^ _ ` { } ~
Re-enter the password for the corresponding administrator.
Check this check box if you want to allow HTTP connections to the IP
camera.
Enter the HTTP port that is used to access the IP camera. Valid port numbers
are 80 and 1024 through 32767. The default port is 80.
If you configure the HTTP port to a value other than 80, you must specify
the port number in the URL for the IP camera when you access it through an
HTTP connection. For example, if the IP address of the IP camera is
192.168.1.100 and the HTTP port is 1024, enter this URL for the IP camera:
http://192.168.1.100:1024.
Check this check box if you want to allow HTTPS connections to the IP
camera.
Enter the HTTPS port that is used to access the IP camera. Valid port
numbers are 443 and 1024 through 65535. The default port is 443.
If you configure the HTTPS port to a value other than 443, you must specify
the port number in the URL for the IP camera when you access it through an
HTTPS connection. For example, if the IP address of the IP camera is
192.168.1.100 and the HTTPS port is 1024, enter this URL for the IP
camera: https://192.168.1.100:1024.
Check this check box if you want to allow access to the camera through a
SSH connection.
are 22 and 1024 through 65535. The default port is 22.
Chapter 6 Administration
OL-28691-01