Product Process Window; Initialization Window - Cisco CIVS-IPC-2500 User Manual

Chapter 3 Configuring and Managing the IP Camera

Product Process Window

The Product Process window displays the processes that occupy TCP or UDP ports, and lets you stop
any of these processes.
Take care when stopping processes because some processes are required for the camera to operate
properly.
Processes that you stop in this window can restart the next time that you log in to the IP camera. If you
delete a required process and the camera stops functioning, exit your web browser and then log back in
to the IP camera to restart the process.
To stop any process, click the Delete button that appears to the right of the process.
To make sure that the Product Process window shows the most current information, click the Refresh
button.
Table 3-10
Table 3-10
Option
Protocol
Local Address
Foreign Address
State
Program Name

Initialization Window

The Initialization window lets you configure administrator and root passwords, whether the IP camera
can be accessed through an HTTP connection in addition to the default HTTPS (HTTP secure)
connection, and whether the IP camera can be accessed through a SSH connection.
Table 3-11
Table 3-11
Option
Admin Password
Root Password
OL-14220-01
describes the options in the Product Process window. All options are for display only.
Product Process Window Options
Description
Port (tcp or udp) that the process occupies
IP address of the device that the process is listening to
IP address and port number of the client device that is connected for the
process
State of the process
Name of the process
describes the options in the Initialization window.
Initialization Window Options
Description
Allows you to change the password for the IP camera administrator.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.
Note You can also change this password in the Users window as described
in the
Allows you to change the root password, which is used when accessing the
IP camera through a SSH connection.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.
"Users Window" section on page
Cisco Video Surveillance System IP Camera User Guide
Security Windows
3-10.
3-19