Cisco 6000 series Configuration Manual page 35

Chapter 4 Feature Setup
Table 4-7
Option
Attach Snapshot
Attach Video Clip
FTP Notification Area
Note
Primary FTP Server
Primary FTP Port
User Name
Password
Enable Passive Mode
Secondary FTP Server
Secondary FTP Port
User Name
Password
Enable Passive Mode
Upload Snapshot
OL-28691-01
Event Notification Window Options (continued)
Description
Check this check box to include with the e-mail message a still picture from
the beginning of the event. This snapshot is stored on the IP camera until the
message is sent.
This functionality is available only when the secondary video stream is
enabled.
Check this check box and enter the following values to include with the
e-mail message a video clip of the event:
• Pre-Capture Length—Enter the amount of video (in seconds) before
the event to include in the video clip.
• Post-Capture Length—Enter the amount of video (in seconds) after the
event to include in the video clip.
This video clip is stored on the IP camera until the message is sent.
FTP is not supported in this release and is disabled in the UI.
Identify the primary FTP server to which snapshots or video clips are
uploaded by choosing IP Address or Hostname from the drop-down list and
entering the IP address or host name in the corresponding field.
Enter the port number that receives messages on the primary FTP server. The
default FTP port number is 21.
Enter the primary FTP server login user name.
Enter the primary FTP server login password.
Check this check box to enable the passive mode feature of the primary FTP
server.
Identify an optional secondary FTP server to which snapshots or video clips
are uploaded by choosing IP Address or Hostname from the drop-down list
and entering the IP address or host name in the corresponding field.
Enter the port number that receives messages on the secondary FTP server.
The default FTP port number is 21.
Enter the secondary FTP server login user name.
Enter the secondary FTP server login password.
Check this check box to enable the passive mode feature of the secondary
FTP server.
Check this check box to upload a snapshot of the activity that triggered the
event.
This functionality is available only when the secondary video stream is
enabled.
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
Event Notification Window
4-15