Cisco 6000 series Configuration Manual page 17

Chapter 3 Viewing Live Video
Table 3-1
Control
Image tools
Hotspot Zoom button Click this latch button to enable the digital zoom feature, which provides
Hotspot Pan/Tilt
button
Save Snapshot button Captures and saves the current video image as a .gif file or a .jpg file in the
Flip button
Mirror button
Restore button
Full Screen button
Motion detection
Up Arrow toggle
button
Down Arrow toggle
button
OL-28691-01
Camera Video & Control Window Controls (continued)
Description
five-step digital zooming in for the normal (not full screen) video display.
Click this button again to disable the digital zoom feature.
To perform a digital zoom, engage the Hotspot Zoom button and click the
video display. The first five clicks zoom the display. The sixth click returns to
unzoomed display.
Click this latch button to enable the hotspot pan/tilt feature, which lets you pan
and tilt the IP camera toward a point that you click in the video display.
To perform a hotspot pan/tilt action, engage the Hotspot Pan/Tilt button, then
click the video image at the location toward which you want the IP camera to
pan and tilt.
This feature requires that the IP camera be installed with a pan/tilt mount that
supports the Pelco D protocol and that pan and tilt functions are enabled.
location of your choice and with the file name of your choice.
When you click this button, the Snapshot window appears. Click Save and
follow the on-screen prompts to save the image with the name and in the
location that you want.
Rotates the video image by 180 degrees.
Reverses the video image.
Displays the default video image, which is not rotated and not reversed.
Displays the video image in full screen mode.
To return to normal display mode, click the full screen image.
Click the Up Arrow to display the motion detection controls. The button
changes to the Down Arrow button.
Click the Down Arrow button to hide the motion detection controls. The button
changes to the Up Arrow button.
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
3-3