Ip Camera Features - Cisco 6000 series Configuration Manual

6000 series video surveillance ip camera
Hide thumbs Also See for 6000 series:
Table of Contents

Advertisement

Overview
This chapter provides information about the Cisco Video Surveillance 6000 Series IP camera features,
instructions for accessing the user interface, and information about the user interface. It includes the
following topics:

IP Camera Features

The Cisco Video Surveillance IP Camera offers a feature-rich digital camera solution for a video
surveillance system. The camera provides high-definition (HD) video and simultaneous H.264 and
MJPEG compression, streaming up to 30 frames per second (fps) at 1080p (1920 x 1080) resolution.
In addition, the IP camera provides networking and security capabilities, including multicast support,
hardware-based Advanced Encryption Standard (AES), and hardware-based Data Encryption
Standard/Triple Data Encryption Standard (DES/3DES) encryption. The camera can be powered through
an external power supply or by integrated Power over Ethernet (PoE).
The IP camera includes the following key features:
OL-28691-01
IP Camera Features, page 1-1
Accessing the IP Camera, page 1-2
Understanding the IP Camera User Interface, page 1-3
H.264 and MJPEG compression—The IP camera can generate H.264 and MJPEG streams
simultaneously.
Progressive scan video—The IP camera captures each frame at its entire resolution using
progressive scan rather than interlaced video capture, which captures each field of video.
Analog video output—Supports analog video for all resolutions with 15 fps or lower with no
secondary stream.
Medianet—The IP camera supports the Auto Smartports feature of the Media Services Interface
(MSI). MSI enables a camera to participate as an endpoint in the Cisco medianet architecture when
connected to a medianet enabled switch.
Day/night switch support—An IR-cut filter provides increased sensitivity in low-light conditions.
Multi-protocol support—Supports these protocols: DHCP, HTTP, HTTPS, NTP, RTP, RTSP,
SMTP, SNMP v2 and v3, SSL/TLS, and TCP/IP.
Web-based management—You perform ongoing administration and management of the IP camera
through web-based configuration menus.
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
1
C H A P T E R
1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Civs-ipc-6000pCivs-ipc-6020Civs-ipc-6030Civs-ipc-6400

Table of Contents