Cisco 6000 series Configuration Manual page 34

Event Notification Window
Table 4-7
Option
POP Server
Authentication
Account Name
Password
Secondary SMTP
Server
Secondary SMTP Port
POP Server
Authentication
Account Name
Password
Send To
Show From Address As Enter the e-mail address to be shown in the From field for the e-mail message
Subject
Attach Video Streaming
URL Address
Cisco Video Surveillance 6000 Series IP Camera Configuration Guide, Release 1.1.2
4-14
Event Notification Window Options (continued)
Description
Identify the primary POP server that is used for sending e-mail by choosing
IP Address or Hostname from the drop-down list and entering the IP
address or host name in the corresponding field.
This field is dimmed if you do not choose Requires POP Before SMTP in
the Authentication field that follows.
If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type from the drop-down list. The
authentication type typically is the same as that for the POP3 server that you
use to receive e-mail.
If the primary SMTP server requires authentication, enter the account name
for the server.
If the primary SMTP server requires authentication, enter the account
password for the server.
Identify an optional secondary SMTP server that is used for sending e-mail
by choosing IP Address or Hostname from the drop-down list and entering
the IP address or host name in the corresponding field.
Enter the port number for the secondary SMTP server. The default SMTP
port number is 25.
Identify an optional secondary POP server that is used for sending e-mail by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
This field is dimmed if you do not choose Requires POP Before SMTP in
the Authentication field that follows.
If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type from the drop-down list. The
authentication type typically is the same as that for the POP3 server that you
use to receive e-mail.
If the secondary SMTP server requires authentication, enter the account
name for the server.
If the secondary SMTP server requires authentication, enter the account
password for the server.
Enter an e-mail address to which an e-mail message is sent when an event
occurs.
that is sent when an event occurs.
Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 118
characters, including spaces.
Check this check box to include in the e-mail message body the URL from
which the recipient can access the live video stream from the camera on
which the event was detected.
Chapter 4 Feature Setup
OL-28691-01