Table of Contents
Advertisement
WM210-220-230-240S/SI
Lateral Shift Adjustment
IMPORTANT ! : The mount covers need to be removed
before proceeding with lateral shift adjustment.
NOTE:
Remove mount covers from the mount following
instructions in Removing Mount Covers section.
1.
Loosen two 1/4-20 x 5/8" hex head cap screws (E) on
underside of mounting bracket. (See Figure 40)
2.
Adjust projector arm laterally to desired position. (See
Figure 40)
3.
Tighten two 1/4-20 x 5/8" hex head cap screws (E)
loosened in Step 1. (See Figure 40)
2
Figure 40
4.
Return outer covers to the mount following instructions in
Installing Mount Covers section.
Security Screw Installation (Optional)
Wall Bracket Covers
1.
Remove eight #8-32 x 1/2" Phillips pan machine screws (F)
from wall bracket covers. (See Figure 41)
1
(Projector arm not shown
for display purposes)
Figure 41
18
2
1
3
(E) x 2
(F) x 8
2.
Install eight #8-32 x 1/2" button head security screws (V)
into holes in wall bracket covers. (See Figure 42)
2
(Projector arm not shown
for display purposes)
Figure 42
Mount Covers
1.
Remove two 8-32 x 3/8" Phillips pan head screws (AB) from
upper cover. (See Figure 43)
2.
Raise and remove the upper cover from the mount. (See
Figure 43)
2
1
Figure 43
Installation Instructions
(V) x 8
Upper
cover
(AB) x 2
Advertisement
Table of Contents
