Table of Contents
Advertisement
Installation Instructions
3
1
Figure 67
Lateral Shift Adjustment
IMPORTANT ! : The mount covers need to be removed
before proceeding with lateral shift adjustment.
NOTE:
Remove mount covers from the mount following
instructions in Removing Mount Covers section.
1.
Loosen two 1/4-20 x 5/8" hex head cap screws (E) on
underside of mounting bracket. (See Figure 68)
2.
Adjust projector arm laterally to desired position. (See
Figure 68)
3.
Tighten two 1/4-20 x 5/8" hex head cap screws (E)
loosened in Step 1. (See Figure 68)
2
Figure 68
4.
Return outer covers to the mount following instructions in
Installing Mount Covers section.
(bottom view)
2
3
1
(E) x 2
Security Screw Installation (Optional)
Wall Bracket Covers
1.
Remove eight #8-32 x 1/2" Phillips pan machine screws (F)
from wall bracket covers. (See Figure 69)
(Projector arm not shown
for display purposes)
2.
Install eight #8-32 x 1/2" button head security screws (V)
into holes in wall bracket covers. (See Figure )
2
(Projector arm not shown
for display purposes)
WM210-220-230-240S/SI
1
(F) x 8
Figure 69
2
(V) x 8
Figure 70
25
Advertisement
Table of Contents
