Precautions For Transporting Your Product - Epson Disc Producer PP-100 User Manual

Precautions for Transporting Your Product

When transporting your product, be sure to use the original box and protective materials to protect it from an impact
or the like. See Setup Guide for Mac for details on the handling of protective materials.
 Make sure that no discs remain inside the product.
 Never remove ink cartridges currently in use. The print head may dry out, and printing
may become no longer possible.
 When attaching protective materials or transporting the product, do not tilt the
product or turn it upside down. Make sure that it is oriented horizontally.
 Be sure that the product is lifted by two people.
damage to the product. In particular, carrying the product while the disc cover, ink
cartridge cover, or Stacker 4 (only for PP-100/PP-100AP) is open may result in the
product being dropped, or deformed and damaged. 
Furthermore, when putting down this product, take care not to trap a finger between
the product and installation surface.
 When lifting this product, make sure that, for example, you sufficiently bend your knees,
and your posture is such that excessive stress is not placed on your body.
An unnatural posture when lifting the product may result in an injury, or the product
being damaged.
 When moving the product, do not tilt it 10 or more degrees in a forward or backward
direction, or a side direction.
The dropping or the like of the product may result in an accident.
 Do not place a heavy object on the top of the product.
Subjecting this product to excessive force may result in a malfunction. 
However, for PP-100 and PP-100AP , it is possible to place one unit of this product on top
of another. In such a case, make sure the tops and bottoms are oriented the same,
and the exterior of the units are aligned. At the same time, take sufficient care to
prevent a unit from dropping or falling. Also, do not place more than one unit on top of
another.
102
The weight of this product is as follows.
PP-100: approximately 24.0 kg
PP-100AP: approximately 22.0 kg
PP-50: approximately 21.0 kg
When this product is lifted, it should be
lifted on both sides by two people
holding the recesses on the sides as
shown in the illustration on the left.
Holding any part other than the ones
indicated in the illustration on the left
when carrying the product may result in