Epson Disc Producer PP-100 User Manual page 112

Lights
STACKER Conditions/Remedies
Power BUSY ERROR INK
1 2 3 4
Disc transfer error
Resolve the problem as follows.
1. Turn the product off.
2. Remove the disc.
3. Turn the product on and retry to publish a
disc.
Arm failed to release a disc
Resolve the problem as follows.
1. Turn the product off.
2. Remove the disc.
If the arm has picked up a disc, do not remove
the disc by hand, as the arm may be damaged.
To remove the disc, turn on the power again,
and let the initialization process remove the disc.
3. Turn the product on and retry to publish a
disc.
If the disc is left in the drive tray or printer tray,
remove it from the tray. (See "Disc Does not
Come Out" on page 123.)
Internal error
Resolve the problem as follows.
1. Turn the product off.
2. Open the disc cover and check that there are
no foreign objects inside; then close the disc
cover.
If the arm has picked up a disc, do not remove
the disc by hand, as the arm may be damaged.
To remove the disc, turn on the power again,
and let the initialization process remove the disc.
3. Turn the product on and retry to publish a
disc.
112