1
Turn the product off.
See
"Turning Off the Power" on page
2
After the Power light goes off, disconnect the power cord and USB cable.
3
Attach protective materials to the arm, and secure them with tape.
4
Attach Stacker 1, Stacker 2, and Stacker 3 (only for PP-100/PP-100AP), and secure them
with tape.
5
Open the ink cartridge cover, and secure the ink cartridges with tape.
6
Close the ink cartridge cover, disc cover, and Stacker 4 (only for PP-100/PP-100AP), and
secure them with tape.
7
With the bottom of the product facing downwards, place the product into the packing box
so that it is oriented horizontally.
19.
Maintenance
103