Cleaning The Print Head - Epson Disc Producer PP-100 User Manual

Cleaning the Print Head

Head cleaning is a function for cleaning the surface of the print head to maintain the print quality. Run head cleaning
if the printing becomes faint or gaps appear in the printing.
Print head cleaning consumes ink. Before running print head cleaning, you can run a
nozzle check to check whether or not the nozzles are clogged. This makes it possible to
Notes
prevent consuming extra ink during print head cleaning. (See
Nozzles" on page
This product has a print head cap to prevent it
from drying, the same way there are caps for
fountain pens or ballpoint pens. Normally, the
print head is automatically capped after
printing finishes, but if the power suddenly goes
off while the product is running, it is not capped
properly and it dries out.
If you do not use this product for a long time,
the print head may dry out and become
clogged, the same way a fountain pen dries up
and no longer writes if it has been left open for
a long time.
If you take the ink cartridges out and leave
them out, the print head dries out.
86
84.)
Normal
Causes and Solutions for Print Head Drying
Cause
Clogged
Prevention
 Plug the power plug into an outlet directly
attached to the wall. Do not connect it to a
power strip with a switch.
 Be sure to turn the power on and off using the
power button.
We recommend that you print regularly. You
can maintain the print head in optimal
condition by printing regularly.
Do not take out the ink cartridges and leave
them out.
"Checking the Print Head