Flow For Publishing Discs - Epson Disc Producer PP-100 User Manual

Flow for Publishing Discs

This section describes how to publish discs using the product.
The publishing procedure differs, depending on whether you publish with EPSON Total Disc Maker or with other
applications.
 If you publish a large number of discs, first publish one disc and check the write result
and print result.
 When the product is used for the first time, after it has been stored for a long time, or
after an error occurs, missing dots or ink stains may appear and print quality may be
reduced on rare occasions. When publishing multiple discs, publish one disc in
advance and check that there are no missing dots. If any dots are missing, perform
head cleaning. (See
 If writing and printing are performed separately, performing writing before printing is
recommended. If writing is performed after printing, ink may cause discs to stick to
each other and result in a disc transport error, or dirt, stains, or scratches on discs may
result in a write error.
When publishing with EPSON Total Disc Maker
EPSON Total Disc Maker
54
"Cleaning the Print Head" on page
Selecting Publish Mode
Select publish mode. (See
Loading Discs
Load discs into the product. (See
Registering Write Data
(only for PP-100/PP-50)
Register data to be written onto discs. (See
Creating Label
Create a label design. (See
Publishing Discs
Publish a job to the product. (See
Taking out Discs
Take out published discs. (See
86.)
page 56.)
page 60.)
page 62.)
page 64.)
page 65.)
page 70.)