Disc Recording Surface Is Stained With Ink - Epson Disc Producer PP-100 User Manual

Disc Recording Surface is Stained with Ink

When the disc recording surface is stained with ink, the printer tray may be dirty. Clean the printer tray by following
the procedure below.
For PP-100/PP-50
1
Turn the product off.
See "Turning Off the Power" on page
2
After the Power light goes off, unplug the power plug from the outlet.
3 Remove the two screws to remove the rear printer cover.
4
Grasp the fixture as shown in the figure below, and push the printer tray in the direction of
the arrow indicated below.
19.
Troubleshooting
129