Advertisement
2) Print/edit position setting << ESC M nx1 nx2 nx3 ny1 ny2 ny3 >>
Code: [1B]h • {
[4D]h • {
For < print/edit direction 0,3 > * ['000'• ... nx1nx2nx3• ... '148']
For < print/edit direction 1, 2, 4, 5 >
The next print/edit position is specified by "x" and "y" axis (mm).
* The upper left corner is (x, y) = (0, 0)
* The upper left end of the next print/edit character is positioned at the axis specified.
* "x" axis value is specified by nx1, nx2 and nx3
Example: If 8mm is specified, nx1• • '0'• A nx2• • '0'• A nx3• • '8'
* "y" axis value is specified by ny1, ny2 and ny3
Example: If 135mm is specified, ny1• • '1'• A ny2• • '3'• A ny3• • '5'
Print/edit position when (x, y) axis are specified.
< Print/edit direction 0, 3 >
‚ ˜
(0,0)
nx1• { nx2• { nx3• { ny1• { ny2• { ny3
* ['000'• ... ny1ny2ny3• ... '072']
* ['000'• ... nx1nx2nx3• ... '072']
*['000'• ... ny1ny2ny3• ... '148']
148mm
mm
• i ‚ ˜ • C ‚ ™ • j
Print/edit character position
‚ `
Paper feed direction
37
Advertisement
