Advertisement
16) Bold print set/reset
Code
Sets and resets the bold print
* "n" is only valid for LSB(b0)
17) Double strike set/reset
Code
Sets and resets the double strike function
* "n" is only valid for LSB(b0)
* Control by "n" is explained as following.
* Double strike and bold print result in the same on this printer.
* The default value of "n" is [00] h.
18) Print and smallest pitch line feed:
Code
Prints the data in the print line buffer and feeds the paper by n/203rd of an inch.
* The height of character for a line is always sent by line feed. If the value of height
is set by "n" below the height of character, the same space with character height
is sent by line feed.
* Beginning of a line is a print start position.
19) International character select :<< ESC R n >>
Code
Selects the international characters.
* The values of "n" have following meanings
:<< ESC E n >>
: [1B] h + [45] h + n
LSB (b0) is defined as following.
b0
Values
0
Resets bold print
1
Sets the bold print
Valid for all characters
Bold print and double strike results in the same on this printer.
The default value of "n" is [00] h.
:<< ESC G n >>
: [1B] h + [47] h + n
b0
Description
0
Resets double strike
1
Sets double strike
<< ESC J n >>
: [1B ] h + [4A ] h + n
: [1B ] h + [52] h + n
n(Hex)
Character sets
00
U.S.A.
01
France
02
Germany
03
England
04
Denmark 1
05
Sweden
06
Italy
07
Spain
08
Japan
09
Norway
0A
Denmark 2
Default value of "n" is [08] h.
* [00≤ n ≤FF] h
* [00≤n≤FF] h
* [00≤n≤FF] h
* [00≤n≤0A] h
22
Advertisement
