Casablanca BEL AIR Owner's Manual page 6

Step 7. To hang the fan body in the
canopy, hold the fan body firmly and insert
the ball into the canopy opening. Check
that no wires were pinched. Rotate the fan
body until the slot in the ball fits into the
pin opposite the canopy opening.
Note: Fan weighs 24 lbs.
CANOPy ELETRICAL CONNECTIONS
Step 8. Attach the fan wires to the
ceiling fixture outlet box wiring by
twisting the bare ends of the wires
together and then securing with a
wire nut.
Connect in this order:
• GREEN leads from mounting plate
and fan to GROUND conductor of
power source. Secure with wire
nut.
• WHITE wire from fan to white NEU-
TRAL wire in ceiling fixture outlet
box. Secure with wire nut.
• BLACK wire from fan to black (or red)
POWER wire in ceiling fixture outlet
box. Secure with wire nut.
Step 9. Tuck the wires into the canopy
with the wire nuts pointed upwards,
so that the WHITE and BLACK wires
are on opposite sides of the canopy
and all wires are clear of the canopy
opening.
Step 10. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
Step 11. Straighten the fan, then
check to ensure that there is no
movement between the canopy and
ceiling or Hang-Tru ball and top sup-
port shaft.
6
HANGING THE FAN
BLACK
WIRES
(2)
WHITE WIRES
(2)
WIRE NUT
CANOPy HATCH INSTALLATION
CANOPy
HATCH
CANOPy
WASHER
CANOPy
SCREW
BALL
SLOT
GREEN WIRES
(3)
PIN
TILT THE
FAN TO
INSTALL
LAST
CANOPy
SCREW