Casablanca BEL AIR Owner's Manual page 4

CROSSBAR MOUNTIING BRACKET INSTALLATION
Proceed with installation as follows:
Step 1. Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the
bracket, with ground wire and ridges down, to the ceiling
fixture outlet box with the mounting hardware included with
the outlet box.
Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.
CAUTION: To reduce the risk
of personal injury, use only the
mounting hardware provided
with the approved outlet box
to install the crossbar mount-
ing bracket.
CANOPy CANOPy
HATCH
Step 2. Attach the canopy to the crossbar mount-
ing bracket with three of the 8-32 x 2
canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.
Note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
4
CANOPy/GLASS HARDWARE
CANOPy LOCk WASHER (4)
GLASS SHADE
CANOPy INSTALLATION
" long
1
/
4
CEILING
FAN
APPROVED
OUTLET
BOX
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
WASHER
OUTLET BOX
MOUNTING
HARDWARE
CANOPy SCREW
(4)
HALOGEN BULB
100 WATT
CROSSBAR MOUNT-
ING
BRACKET INSTALLED
CANOPy
CANOPy LOCk
WASHERS
CANOPy
SCREWS
RIDGE
SIDE
DOWN
GREEN
GROUND
WIRE
BODy TOP
COVER