Casablanca BEL AIR Owner's Manual page 5

INSTALLING THE FAN BODy TOP COVER
iMPortaNt! To avoid possible damage to the
Halogen bulb holder the fan must be placed on
the styrofoam packaging from the box. After
removing the top cover from the upper half of the
styrofoam, take the packaging from the box and
put it on the floor. Place the fan in the recessed
circle that the top cover was in.
Step 3. Locate the three tabs on the top of the fan
motor assembly.
Remove the three top cover retaining screws and set
aside for Step 6.
Step 4. Locate the top cover and note the three
mounting tabs on the top.
Step 5. Lower the top cover over the fan downrod
with the top cover mounting tabs lined up with the
tabs on the fan motor assembly.
Step 6. Once the tabs are aligned, attach the top cover to the
motor using the three top cover retaining screws removed in
Step 3. Hand tighten ensuring that all screws are engaged.
Test that the cover is on securely before continuing with the
installation.
Note: Make a note of
the Fan Serial Number and
Model Type before install-
ing the top cover.
TOP COVER
MOUNTING
TABS
B A
®
el ir
TOP COVER
RETAINING
SCREWS
FAN MOTOR
ASSEMBLY
COVER
TOP COVER
RETAINING
SCREWS
TOP
5