Download Print this page

Casablanca Le Grande Owner's Manual page 8

Hide thumbs Also See for Le Grande:

Advertisement

Warning: To reduce the risk of electrical shock, this fan must be installed with an
isolating wall control/switch.
W-72
CONTROL
VerSa•ToUch 2 ♦ CONTROL BRACKET INSTALLATION
INNER
mOUNTINg
HOLES
CONTROL
BRACKET
Standard Light Switch
Step A. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line up the
two inner mounting holes with those on the switch.
Step C. Install and tighten screws by hand only.
Wall Installation
Step A. Locate a 2x4
wall stud in a convenient
location.
Step B. Orient the control
bracket as shown over the
2x4 stud.
Step C. Use the 1" wood
screws in either the inner
or outer mounting holes.
Install and tighten screws
by hand only.
changes or modifications not expressly
approved in writing by casablanca fan co.
may void the user's authority to operate
this equipment.
8
®
SAFETY FIRST
VerSa•ToUch 2 ♦ INSTALLATION
W-72
CONTROL
HOLDER
12V BATTERY
CAUTION! Do not use with wall dimmer.
STANDARD
TOggLE
SWITCH
SWITCH
COVER
pLATE
This device complies with RSS-210 of Industry Canada. Operation is subject to
the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
DRYWALL
WOOD
ANCHOR
SCREW
6-32 (2)
1" (2)
OUTER
mOUNTINg
HOLES
CONTROL
BRACKET
Rocker Light Switch
Step A. Break off the two tabs by pushing outward.
Step B. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step C. Orient the control bracket as shown and line up the
two inner mounting holes with those on the switch.
Step D. Install and tighten screws by hand only.
note: The wall anchors and 6-32 x 1" screws may be used
in situations where mounting to a stud is not possible.
Use the inner mounting holes. After securing the anchor,
discard the anchor's pointed screws and use the 6-32
decor ovalhead screws supplied.
ANCHOR
pANHEAD
SCREW
WOOD
SCREW 1"
SCREW
SCREW
6-32 X
/
"
6-32 X 1"
3
8
(2)
(2)
ROCKER
TYpE
LIgHT
SWITCH
SWITCH
COVER
pLATE
DRYWALL ANCHOR
DECOR OVALHEAD SCREW
6-32 X 1"

Advertisement

loading