Advertisement
Step 2. Attach the canopy to the crossbar mount-
ing bracket with three of the 8-32 x 2
canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.
note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
Step 3. To hang the fan body in the
canopy, hold the fan body firmly and
insert the ball into the canopy open-
ing. Check that no wires were pinched.
Rotate the fan body until the slot in the
nylon ball fits into the pin opposite the
canopy opening.
noTe: The fan weight is 27 pounds.
Step 4a. Attach the fan wires to the ceiling fixture outlet
box wiring by twisting the bare ends of the wires together
and then securing with a wire nut. Test that the connection
is secure by pulling on the wire nut. Connect in this order:
Step 4b. Wiring Connections
• GREEN leads from mounting plate and fan to GROUND
conductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceiling
fixture outlet box. Secure with wire nut.
• BLACK power wire from fan to BLACK power wire in ceiling
outlet box. Secure with wire nut.
CANOpY INSTALLATION
" long
1
/
4
HANgINg THE FAN
CANOpY ELECTRICAL CONNECTIONS
Le Grande
CANOpY
CANOpY LOCK
WASHER
CANOpY
SCREW
BALL
SLOT
WIRE NUT
2 BLACK WIRES
2 WHITE
WIRES
3 gREEN
WIRES
™
CROSSBAR
mOUNTINg
BRACKET
pIN
5
Advertisement
