Advertisement
Step 11. Insert 1 grommet in each of the
4 holes in all blades.
Step 11a. Attach each blade to a blade
holder securing it with the four blade
screws provided.
Tighten securely by hand only.
Step 12. Attach each blade/
blade holder assembly to the
motor.
Tighten securely by hand only.
Warning: To Reduce The Risk Of
Personal Injury, Do Not Bend The
Blade Brackets When Installing The
Brackets, Balancing The Blades, Or
Cleaning The Fan. Do Not Insert
Foreign Objects In Between Rotat-
ing Fan Blades
Step 13. Reinstall the switch housing mount
removed in Step 10.
Tighten securely by hand only.
SWITCH HOUSINg mOUNT
REmOVED IN STEp 10
note: Versa•Touch models
will have only a wire nut
capping the black and
white wires coming out of
the fan motor.
If you wish to install an accessory light kit at this time, follow the instructions for installation that came with the light kit.
After you have installed the light kit, or if you do not wish to install an accessory light kit, continue with these instructions.
BLADE INSTALLATION
SHOULDER SCREW
(4 pER BLADE)
gROmmET
(4 pER BLADE)
BLADE/BLADE HOLDER INSTALLATION
SWITCH HOUSINg mOUNT REINSTALLATION
SHOULDER SCREW
8-32 X
" (3)
3/8
ACCESSORY LIgHT KIT INSTALLATION
A
urorA
BLADE
HOLDER
BLADE HOLDER
SCREW
(2 pER BLADE)
II
™
BLADE
7
Advertisement
